Ir al contenido principal

Es salt des Freu, Randa and more corrosion

This week I took advantage of the good weather to go on a excursion to a couple of places that I had planned to go for a long time. The first excursion we have done this week, has been to visit a small river near Buñola where there is a waterfall called “Salt des Freu”. It is an excursion that does not take long if you are only going to visit the waterfall. My partner and I took less than 20 minutes to get from the car to the waterfall. To get there, the road is a bit narrow and has many curves, but it is not very difficult to get there. The trail that reaches the falls is located on the road from Bunyola to Orient. The trail that goes to the falls reaches Santa Maria del Camino. It is many hours of walking to get to Santa Maria. Here you can see some pictures we took when we reached the waterfall.


The second excursion that my partner and I did was to climb the mountain of Randa. The mountain is right next to my house, but we took the car to reach the village of Randa. From there, we climbed the mountain on trails, but I was wrong on the way and the climb was a bit complicated. Upon reaching the top, we enter the Sanctuary of Cura which is located on top. The Sanctuary was closed and we could not leave without the help of some workers who were working up there. It was night and in the end we went down by the main road on foot.
In globalia formation we are eliminating the corrosion of the tools we use to lift the airplanes, and we also eliminate and protect the corrosion of the structure of the airplanes that we have. To eliminate corrosion, we use hand sandpaper and spatulas to remove paint. Then we apply a product that creates an aluminum oxide film that protects the aluminum at the bottom.

Comentarios

Publicar un comentario

Entradas populares de este blog

Questions about Rolls Royce's jet engine

Here I post all the questions I solved in the Rolls Royce's web page:  1-Why are turbine blades coated with a ceramic material? A)It makes them lighter  B)It helps make them stronger  C)It helps to stop them melting- D)It makes them a better colour 2-Why can’t titanium be used to make turbine blades? A)In temperatures over 600ºC where it rubs against other metals, it can burn- B)It is too dense and would be too heavy to use C)It is the wrong colour D)It is too expensive 3-Drag and drop the densities to the correct material: Titanium 6/4: 4.5g/cm3 Nickel alloy 8.2g/cm3 Partially yttrium stabilized zirconia: 5.1g/cm3 Nickel super alloy: 8.4g/cm3 4-What are the two main things engineers must consider when choosing materials to use in an engine? A)Colour and weight B)Cost and colour C)Weight and name  D)Cost and weight - 5-Which statement is true? A)To active the same amount of thrust you can either accelerate a Sma...

Maintenance Technician Course

In this post I will talk about how to obtain the title of superior technician in aeromechanical maintenance and how to obtain the license of technician in maintenance of airplanes B1.1 which is the necessary license to be able to sign in the documents of a commercial turbine aircraft. I will explain how to access these studies and what are the advantages of studying at the IES Son Pacs. I have selected some questions that may come to your mind before starting the course and that can help guide you. -How can I access these studies? As it can be accessed in several ways, in each course there are limited places for people who access through the bachillerato degree, other places for people who access by an vocational course of the same family or another family, there are also places for who access with an entrance exam to the university or an entrance exam to a vocational course. -Where do classes take place? During the first course, classes are held every Monday at the IES Son Pac...

The ultimate toolbox

Since I was child I always liked to disassemble anything. I consider myself a skillful person with the tools. It has never been difficult for me to assemble an ikea furniture. My first job was at 15 with a motorcycle that my parents gave me, and I dind't have a driving license, I decided to take it apart to fix it. In all the jobs that I have done I have always lacked tools. For this reason we have designed a toolbox that puts at your disposal any tool you may need and some that you think you will never use, but you will end up using it. For this reason we have designed a toolbox that puts at your disposal any tool you may need and some that you think you will never use, but you will end up using it. In the box you will find some tools such as: A universal socket wrench that adapts to any screw automatically. Price: 10,95$ A ratchet wrench that you do not need sockets to use, fits any hex head screw. Price: 18,87$ A screwdriver that already has all the tips integrated ...